Description
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to remove wax and contaminants from composite molds. Chemlease® Mold Cleaner EZ is ideal for preparing composite mold surfaces for the application of Chemlease® mold sealers and releasants. Chemlease® Mold Cleaner EZ is also excellent for cleaning brushes and equipment. 

Application
1. Chemlease® Mold Cleaner EZ should be applied to the mold surface with clean, 100% cotton cloths. While the mold surface is still wet, vigorously wipe the mold dry with a second clean, dry, 100% cotton cloth.
2. Frequently exchange saturated cloths with new, clean cloths.
3. Repeat process several times (a minimum of two cleanings is recommended) until all residues (dirt, dust, grease, moisture, etc.) are removed.
4. The mold is then ready for application with the appropriate Chemlease® Mold Sealer and/or Chemlease® Mold Release.

Handling and Storage
Chemlease® Mold Cleaner EZ is flammable and must be kept away from heat, sparks, and open flame. The can should be kept closed when not in use to prevent evaporation of flammable solvents. Store material in a cool location. Avoid breathing of vapor or spray mist or prolonged contact with skin. Use only with adequate ventilation. DO NOT take internally. In confined areas, operators should wear respirators or fresh air masks. Industrial grade solvent resistant gloves should be worn while using Chemlease® materials.

Packaging
Chemlease® Mold Cleaner EZ is available in 1-quart (1 liter), 1-gallon (4 liter), 5-gallon (20 liter) and 55-gallon (208 liter) containers.

Safety Data
Material Safety Data Sheets are available for all Chemlease® products and should be consulted prior to use of the product.

NOTE:
If you plan to use compounds or glazes, etc., prior to applying Chemlease® Mold Sealer and/or Chemlease® Mold Release, be sure to wipe clean with Chemlease® Mold Cleaner EZ after doing so, as most buffing compounds will not allow Chemlease® sealers and release agents to work properly. Prolonged exposure on the mold surface (puddling, dipping, etc.) should be avoided.

While the technical information and suggestions for use contained herein are believed to be accurate and reliable, nothing stated in this bulletin is to be taken as a warranty either expressed or implied.